Register Cover Plate 5"

Description

A brilliant product to finish off the gap where you may need to cut your hole in your register plate. The register plate cover simply screws up (screws not included) to the register plate to finish off the your install.

• Easy to install;
• Galvanised steel;
• Foam included.

Installation

Top plate, fitted with a top sleeve and clamp. With the flexible liner protruding from the top of the masonry chimney, feed the plate over the end of liner and place on top of brickwork cut the liner approximately 125 mm above the plate, insert the top sleeve. Now fit the clamp around the liner on top of the plate and tighten, (optional rain cap can be fitted) the plate will then need to be made watertight with sand and cement. Or finished off with a traditional chimney pot.